User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            SD104A-5 Sweep Rate Sub
DATE:                  06-Mar-97
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       6
NUMBER OF LINES:       92
CONFIGURATION:         HP 5335A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  HEAD         {}
  1.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.003  HEAD         {º Sweep Times º}
  1.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.005  HEAD         {Linear Sweep, Rate=10}
  1.006  HEAD         ÍÍ Sweep Times ÍÍ
  1.007  JMP          2.001
  1.008  EVAL
  2.001  DISP         ÿÿÿÿÿÿÿÿSet the UUT as follows:
  2.001  DISP         Mode Switch ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] SINGLE LINEAR
  2.001  DISP         SWEEP RATE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10
  2.001  DISP         MULTIPLIER (B) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10
  2.002  DISP         Using a tee, connect the J23 on the UUT to CH A and CH B
  2.002  DISP         of the HP 5335A counter.
  2.003  DISP         Press RESET UP on the UUT.
  2.004  DISP         Adjust the UPPER SWEEP LIMIT control for a UUT
  2.004  DISP         indication of "50" on the 500-5000 Hz range.
  2.005  DISP         Press RESET DOWN on the UUT.
  2.006  DISP         Adjust the LOWER SWEEP LIMIT control for a UUT
  2.006  DISP         indication of "5" on the 5-50 Hz range.
  2.007  IEEE         [@5335][TERM LF]
  2.008  IEEE         [@5335]IN[D1000];
  2.009  IEEE         [@5335]FN2;GM0;GA.25;CO0;BX1;
  2.010  IEEE         [@5335]FN14;[D500][GTL]
  2.011  DISP         On the 5335A adjust the CH A trigger level for 0.01V.
  2.011  DISP         Adjust the CH B trigger level for 9.9V.
  2.012  IEEE         [@5335]RE;FN2;
  2.013  DISP         On the UUT depress the RESET DOWN button.  The LED above
  2.013  DISP         the button should be on.  Now depress the SWEEP UP
  2.013  DISP         button.  That LED should go on and the RESET DOWN LED
  2.013  DISP         should extinguish.
  2.014  HEAD         [27][91]5m**PLEASE WAIT. LONG GATE TIME!**[27][91]m
  2.015  IEEE         [@5335][T0][I]
  2.016  HEAD
  2.017  ACC          49.95T         0.001%
  2.018  MEME
  2.019  MEMC         T              0.500U        mult=10
#!          Test Tol 0.5, Sys Tol 0.0004995, TUR 1001.001 (>= 4.00).
  3.001  HEAD         ÍÍ Sweep Rate ÍÍ
  3.002  DISP         ÿÿÿÿÿÿÿÿSet the UUT as follows:
  3.002  DISP         MULTIPLIER (B) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1
  3.003  IEEE         [@5335]RE[D1000];
  3.004  DISP         On the UUT depress the RESET DOWN button.  The LED above
  3.004  DISP         the button should be on.  Now depress the SWEEP UP
  3.004  DISP         button.  That LED should go on and the RESET DOWN LED
  3.004  DISP         should extinguish.
  3.005  HEAD         [27][91]5m**PLEASE WAIT. LONG GATE TIME!**[27][91]m
  3.006  IEEE         [@5335][T0][I]
  3.007  HEAD
  3.008  ACC          499.5T         0.001%
  3.009  MEME
  3.010  MEMC         T              5.00U         mult=1
#!          Test Tol 5, Sys Tol 0.004995, TUR 1001.001 (>= 4.00).
  4.001  HEAD         {}
  4.002  HEAD         {Log Sweep, Mult.=10, Rate=10}
  4.003  HEAD         ÍÍ Sweep Rate ÍÍ
  4.004  JMP          5.001
  4.005  EVAL
  5.001  DISP         ÿÿÿÿÿÿÿÿSet the UUT as follows:
  5.001  DISP         Mode Switch ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] SINGLE LOG
  5.001  DISP         MULTIPLIER (B) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10
  5.002  DISP         Press RESET UP on the UUT.
  5.003  DISP         Adjust the UPPER SWEEP LIMIT control for a UUT
  5.003  DISP         indication of "50" on the 500-5000 Hz range.
  5.004  DISP         Press RESET DOWN on the UUT.
  5.005  DISP         Adjust the LOWER SWEEP LIMIT control for a UUT
  5.005  DISP         indication of "5" on the 5-50 Hz range.
  5.006  IEEE         [@5335]RE[D1000]
  5.007  DISP         On the UUT depress the RESET DOWN button.  The LED above
  5.007  DISP         the button should be on.  Now depress the SWEEP UP
  5.007  DISP         button.  That LED should go on and the RESET DOWN LED
  5.007  DISP         should extinguish.
  5.008  HEAD         [27][91]5m**PLEASE WAIT. LONG GATE TIME!**[27][91]m
  5.009  IEEE         [@5335][T0][I]
  5.010  HEAD
  5.011  ACC          18.0T          0.001%
  5.012  MEME
  5.013  MEMC         T              0.10U
#!          Test Tol 0.1, Sys Tol 0.00018, TUR 555.556 (>= 4.00).
  6.001  END